Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install the Rear Camera on a Volvo XC60

Model: Volvo Xc60 MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Checks and maintenance

See other generations:
Video tutorial

In this video, install the rear camera (where the license plate light is located) on the rear hatch of a Volvo XC60. First, open the rear hatch of the vehicle, then remove the rear license plate. Use a screwdriver to unscrew the screws on the plastic trim of the hatch (inner part).

Detach the plastic trim of the license plate light from the hatch, and unscrew the fastening pins (located between the hatch metal and the plastic trim). Finally, install the rear camera in the license plate light bar of the vehicle (connect the camera's power connector to the vehicle's terminals).


Updated on 13 March 2026 by ScegliAuto


Related tutorials

How to disassemble the rear light of the Volvo XC60
How to disassemble the rear light of the Volvo XC60
Volvo Xc60 (2008-2016 / MK 1) Today we will discover the information and instructions that will allow us to disassemble and replace the rear taillight of the Volvo XC60. First, we…
How to install front and rear cameras on the Volvo XC60
How to install front and rear cameras on the Volvo XC60
Volvo Xc60 (2008-2016 / MK 1) In this video tutorial, we will see information on how to install the cameras (both front and rear) of the Volvo XC60, following the instructions bel…
How to replace the battery of the Volvo XC60 key.
How to replace the battery of the Volvo XC60 key.
Volvo Xc60 (2017-2026 / MK 2) To complete the replacement of the battery inside the key of your second-generation Volvo XC60, simply follow the procedure described in our new mini…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos