Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Boot Light Bulb

Model: Volvo S40 MK 1 - Years 1995-2004
Part: Light bulb

Here is a simple and brief video showing how to replace the bulb of the light located in the boot of a Volvo S40. The operation requires very few steps: after opening the boot, get a flathead screwdriver and remove the lens of the lamp. Using your fingers, disconnect the two small electrical connectors. Now take the lens and gently remove the bulb to be replaced and insert a new one. Reconnect the two connectors. At this point, the light should turn on. As a final step, reposition the lens and the new bulb in the small compartment. Done!

Updated on 4 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of Front Headlight Bulb
Replacement of Front Headlight Bulb
Volvo S40 (2004-2012 / MK 2) To replace the front headlight bulb, it is advisable to remove the headlight from the vehicle to facilitate the operation. Once the front headlight i…
Removing and Replacing Front Headlight Bulb
Removing and Replacing Front Headlight Bulb
Volvo S40 (1995-2004 / MK 1) This video illustrates in a few simple steps how to remove and replace the front headlight bulb of your car. First, access the bulb housing by unscre…
Replacement of T5 Bulbs for Climate Control
Replacement of T5 Bulbs for Climate Control
Volvo S40 (1995-2004 / MK 1) First, remove the climate control adjustment knobs by pulling them outward. Using a small flat screwdriver or a plastic trim tool, detach the plastic…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos