Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Wiper Blades with Frame-less Ones

Model: Volvo V70 MK 2 - Years 2000-2007
Part: Windshield wipers

Good visibility is important, especially during bad weather, so it's advisable to replace wiper blades frequently. Purchase the new frame-less wiper blade. To replace it, unclip the lever on the wiper arm, push the structure forward until it comes out of the seat, then remove the blade from the arm. Take the new blade out of the packaging, lift the retaining hook, and slide the blade onto the arm. Lower the blade towards the bonnet until the spring clicks into place. Lower the retaining hook and rest the blade on the glass. Check the correct operation by activating the wiper.

Updated on 5 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Where are the Fuses Located in the Volvo V70?
Where are the Fuses Located in the Volvo V70?
Volvo V70 (2000-2007 / MK 2) Each fuse in the Volvo V70 is contained within one of the dedicated fuse boxes installed in the vehicle: there are three, located in three different …
How to Replace the Front Headlight Bulbs on a Volvo V70?
How to Replace the Front Headlight Bulbs on a Volvo V70?
Volvo V70 (2000-2007 / MK 2) This tutorial demonstrates how to replace the front headlight bulbs on a Volvo V70, a very simple and quick task. First, ensure that the key is not i…
Guide to Replacing the Timing Belt on the Volvo V70
Guide to Replacing the Timing Belt on the Volvo V70
Volvo V70 (2000-2007 / MK 2) Let's briefly discover the instructions that will allow you to dismantle and replace the timing belt on the Volvo V70. First, open the bonnet and sta…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos