Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. V70
    4. : How to take out the seat of the Volvo V70

Volvo V70 - Video tutorial

Model: Volvo V70 MK 2 - Years 2000-2007
Part: Seat
Operation: How to take out the seat of the Volvo V70

Remove the seat of the Volvo V70? Easy operation if we proceed in order, let's see. We move the seat back (with the electric buttons if present) and bring the seat up, then, with a socket wrench, unscrew the tightening screws placed on the front rail. We move the seat forward with the shift buttons and remove the locking pins from the rear of the rail. We disconnect the power terminals of the front seat (displacement of the seats and airbags). We take out the seat or take it to a specialized center. We mount the seat inside the passenger compartment, we tighten the clamping screws.


Posted on 22 December 2023 by ScegliAuto



How to reset the "Service" light on a Volvo V70?
Volvo V70 (2000-2007 / MK 2) Good morning! Today we will focus on resetting the "Service" light on our Volvo V70. Before we begin, it is essential to have performed the recommend
Where is the fuse box located in the Volvo V70 2001?
Volvo V70 (2000-2007 / MK 2) If you want to discover where all the fuses of your second generation Volvo V70 (year 2001) are located, you simply need to read the instructions in
Remove Volvo V70 fuel float
Volvo V70 (2000-2007 / MK 2) We see the disassembly of the pump from inside the tank of the Volvo V70. We disassemble the rear seats: we find the tank cover in the lower part of

    Frequently Asked Questions

    • V70 2000-2007 - How to fold down the rear seats of a Volvo V70? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos