Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the "Service" light on a Volvo V70?

Model: Volvo V70 MK 2 - Years 2000-2007
Part: Service warning light

Hello! Today, reset the "Service" light on your Volvo V70. Before starting, ensure you have completed the recommended service. Begin by sitting in the driver's seat. Next, turn the ignition key to start the instrument cluster. Once done, press and hold the reset button located below the speedometer. Keep it pressed until the reset message appears. When the "Service" light disappears from the instrument cluster of your Volvo V70, release the reset button to complete the procedure successfully.

Updated on 18 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on Volvo V70?
How to Reset the Service Light on Volvo V70?
Volvo V70 (1996-2000 / MK 1) To clear the service light on the Volvo V70, you need to press and hold the button located at the bottom centre of the instrument panel while it is o…
How to reset the service light on the Volvo V70?
How to reset the service light on the Volvo V70?
Volvo V70 (2007-2016 / MK 3) Today, we will discover the steps and instructions that will allow us to reset the service and routine maintenance light on the Volvo V70. First, get…
How to Reset the Service Light on a Volvo V70 Mk1
How to Reset the Service Light on a Volvo V70 Mk1
Volvo V70 (1996-2000 / MK 1) In this mini guide for your Volvo V70 Mk1, learn how to correctly reset the service light independently. First, get inside the car and ensure it is c…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos