Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the External Wing Mirror on the Volvo V70

Model: Volvo V70 MK 2 - Years 2000-2007
Part: Side mirror

Today's guide shows you how to remove and replace the external wing mirror on the Volvo V70, following the instructions below. First, open the front door and start by removing the triangular plastic cover of the wing mirror, prying it off from the sides; then unscrew the fixing screws of the external wing mirror to detach it from the door, as shown in the video. At this point, install the new external wing mirror, securing it properly with the screws and finally adjusting it!

Updated on 31 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Glass of the External Rear-View Mirror on a Volvo V70?
How to Replace the Glass of the External Rear-View Mirror on a Volvo V70?
Volvo V70 (2007-2016 / MK 3) The procedure shown here for replacing the glass of an external rear-view mirror on a Volvo V70 is valid not only for similar models from the Volvo b…
How to replace the external rearview mirror on a Volvo V70
How to replace the external rearview mirror on a Volvo V70
Volvo V70 (2000-2007 / MK 2) In this video tutorial, we will see the necessary instructions to remove and replace the external rearview mirror on a Volvo V70, following these sim…
How to Replace the External Wing Mirror on the Volvo V70 MK2
How to Replace the External Wing Mirror on the Volvo V70 MK2
Volvo V70 (2000-2007 / MK 2) Discover the steps to remove and replace the external wing mirror on the second series Volvo V70 in this video. First, open the front door and start …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos