Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the External Wing Mirror on the Volvo V70 MK2

Model: Volvo V70 MK 2 - Years 2000-2007
Part: Side mirror

Discover the steps to remove and replace the external wing mirror on the second series Volvo V70 in this video. First, open the front door and start by unscrewing the fixing screws of the door panel, located on the sides of the panel and under the handle cover; then disconnect the electric connector of the switch panel and the handle cable. At this point, disconnect the mirror connector and use a 13 mm socket spanner to unscrew the mirror screw; then slide it out from the outside, replacing it with the new one!

Updated on 30 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the External Wing Mirror on the Volvo V70
Replacement of the External Wing Mirror on the Volvo V70
Volvo V70 (2000-2007 / MK 2) Today's guide shows you how to remove and replace the external wing mirror on the Volvo V70, following the instructions below. First, open the front …
How to Replace the Indicator Bulb on a Volvo V70
How to Replace the Indicator Bulb on a Volvo V70
Volvo V70 (2000-2007 / MK 2) To replace the indicator bulb on the external rear-view mirror of a Volvo V70, lever it out using a tool like a screwdriver to extract the light unit…
How to replace the external rearview mirror on a Volvo V70
How to replace the external rearview mirror on a Volvo V70
Volvo V70 (2000-2007 / MK 2) In this video tutorial, we will see the necessary instructions to remove and replace the external rearview mirror on a Volvo V70, following these sim…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos