Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Indicator on the Side Mirror of a Volvo V70

Model: Volvo V70 MK 3 - Years 2007-2016
Part: Side marker bulb

Today, in this tutorial, you will learn how to remove and replace the indicator on the external rear-view mirror of a Volvo V70. First, remove the plastic cover of the mirror using a very thin plastic lever. Then, remove the bulb holder for the indicator by disconnecting the connector and taking out the small bulb, as shown in the video. At this point, install the new bulb or the entire new unit; apply the reverse procedure for reassembly!

Updated on 17 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the External Wing Mirror on the Volvo V70
Replacement of the External Wing Mirror on the Volvo V70
Volvo V70 (2000-2007 / MK 2) Today's guide shows you how to remove and replace the external wing mirror on the Volvo V70, following the instructions below. First, open the front …
How to Replace the Glass of the External Rear-View Mirror on a Volvo V70?
How to Replace the Glass of the External Rear-View Mirror on a Volvo V70?
Volvo V70 (2007-2016 / MK 3) The procedure shown here for replacing the glass of an external rear-view mirror on a Volvo V70 is valid not only for similar models from the Volvo b…
How to Replace the Indicator Bulb on a Volvo V70
How to Replace the Indicator Bulb on a Volvo V70
Volvo V70 (2000-2007 / MK 2) To replace the indicator bulb on the external rear-view mirror of a Volvo V70, lever it out using a tool like a screwdriver to extract the light unit…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos