Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. V70
    4. : How to replace the front headlight bulbs in the Volvo V70?

Volvo V70 - Video tutorial

Model: Volvo V70 MK 2 - Years 2000-2007
Part: Headlight bulb
Operation: How to replace the front headlight bulbs in the Volvo V70?

In this tutorial, we can see how to replace the front headlight bulbs in the Volvo V70, an extremely simple and quick operation. First of all, make sure that the key is not inserted, so that we can work safely. Then, open the engine hood, remove the rivets located on the upper edge of the grille, and unscrew the fixing bolts. Next, detach the plastic moldings of the bumper, unscrew the additional indicated bolts, and remove the windshield wiper blades. At this point, we can separate the bumper from the frame, unscrew the fixing bolts of the headlights, open them, and replace the faulty bulbs.


Posted on 22 November 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • V70 2000-2007 - How much does it cost to replace the xenon bulbs of the Volvo V70? Read Answer
    • V70 2000-2007 - How to remove the headlight bulb of a Volvo V70? Read Answer
    • V70 1996-2000 - How to remove the headlight bulb of a Volvo V70? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos