Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. V70
    4. : Brake stop bulb replacement

Volvo V70 - Video tutorial

Model: Volvo V70 MK 2 - Years 2000-2007
Part: Light bulb
Operation: Brake stop bulb replacement

In order to avoid rear-end collisions, it is advisable to also check the stop lamps. If the stop light is burned out, it should be replaced. The operation is very simple and easy to carry out. Open the tailgate and remove the light cover by pulling it sideways. Remove the plastic hooks that secure the ceiling light. Unhook the retaining springs, identify the burned-out bulb and replace it with a new one, making sure to use one of the same model. The characteristics of the bulb are stamped on the body of the same, reporting the voltage and consumption in watts. Reassemble the ceiling light making sure it is firmly in place and test the lighting of the lamp.


Posted on 16 July 2023 by ScegliAuto



Interior ceiling light bulb replacement
Volvo V70 (2000-2007 / MK 2) Choose the new replacement bulb identical to the one to be replaced. Using a plastic tool, remove the light cover to access the bulb holder, unscrew
Glovebox bulb replacement
Volvo V70 (2000-2007 / MK 2) Open the glovebox to access the bulb holder, remove the faulty bulb by simply pulling it outwards and refit the new bulb. Choose the new replacement
Replacement exterior mirror bulb
Volvo V70 (2000-2007 / MK 2) First of all, orient the mirror upwards in order to create the space in the lower part necessary to insert a small fixed screwdriver. At this point,

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos