Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of External Mirror Bulb

Model: Volvo V70 MK 2 - Years 2000-2007
Part: Side mirror

First, tilt the mirror upwards to create space at the bottom for inserting a small flat screwdriver. At this point, locate the retaining tab of the bulb holder and press it to release the bulb holder. Then, replace the old bulb with the new LED bulb, checking its operation (if it does not light up, rotate the bulb 180°). Once you are sure the new bulb works, reattach the bulb holder to the external rear-view mirror. Proceed in the same manner to replace the bulb on the other rear-view mirror.

Updated on 4 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the External Wing Mirror on the Volvo V70
Replacement of the External Wing Mirror on the Volvo V70
Volvo V70 (2000-2007 / MK 2) Today's guide shows you how to remove and replace the external wing mirror on the Volvo V70, following the instructions below. First, open the front …
How to Replace the Glass of the External Rear-View Mirror on a Volvo V70?
How to Replace the Glass of the External Rear-View Mirror on a Volvo V70?
Volvo V70 (2007-2016 / MK 3) The procedure shown here for replacing the glass of an external rear-view mirror on a Volvo V70 is valid not only for similar models from the Volvo b…
How to replace the external rearview mirror on a Volvo V70
How to replace the external rearview mirror on a Volvo V70
Volvo V70 (2000-2007 / MK 2) In this video tutorial, we will see the necessary instructions to remove and replace the external rearview mirror on a Volvo V70, following these sim…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos