Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. V70
    4. : How do I replace the climate control bulb on the Volvo V70?

Volvo V70 - Video tutorial

Model: Volvo V70 MK 2 - Years 2000-2007
Part: Light bulb
Operation: How do I replace the climate control bulb on the Volvo V70?

In order to replace the Volvo V70 climate control bulb, the glove box must be opened, which is located immediately below the panel and above the gear lever. In this way it will be possible to loosen the two torx screws inside, which, once loosened, will allow you to extract the panel and disconnect the connectors in its rear part. In this way it will be possible to extract the bulbs from inside their housings, using a screwdriver as a lever. After the new bulbs have been inserted, the panel can be connected and re-attached.


Posted on 10 March 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos