Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Glove Compartment Bulb

Model: Volvo V70 MK 2 - Years 2000-2007
Part: Light bulb

Open the glove compartment to access the bulb holder, remove the faulty bulb by simply pulling it out, and reinstall the new bulb. Choose a new replacement bulb identical to the one being replaced. LED bulbs of the tubular type are available on the market and are perfectly compatible with the old filament bulbs; in any case, the two bulbs are fully interchangeable without any modifications to the system. For LED bulbs, it is important to install them with the correct polarity. If the new bulb does not light up, rotate the bulb 180 degrees and reinstall it.

Updated on 5 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Cabin Light Bulb with LED
Replacing the Cabin Light Bulb with LED
Volvo V70 (2000-2007 / MK 2) To access the bulbs of the cabin light, first remove the cover of the light itself: it is simply clipped in, just pull it downwards to unclip it alon…
Replacing Instrument Cluster Bulbs with LED Alternatives
Replacing Instrument Cluster Bulbs with LED Alternatives
Volvo V70 (2000-2007 / MK 2) To replace the instrument cluster illumination bulbs, first remove the instrument cluster from the vehicle. Once this is done, there are four main il…
Replacing Brake Light Bulb
Replacing Brake Light Bulb
Volvo V70 (2000-2007 / MK 2) To avoid collisions, it is advisable to check the brake lights as well. If the brake light is burnt out, it is best to replace it. The operation is v…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos