Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Dismantling Cabin Fan on Volvo V40

Model: Volvo V40 MK 1 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Blower motor

See other generations:
Video tutorial

Use a plastic wedge to remove the trim surrounding the climate control buttons, then unscrew the four screws now exposed at the corners. Extract the controls by disconnecting the connections, and attempt to replace the control itself.

If it still does not work, move on to the fan. It is located at the bottom of the dashboard, accessible from the passenger side by removing the panel under the glove compartment. At this point, try changing the dissipator connected to the connector, as shown in the video, which is usually the cause of the problem.

Otherwise, unscrew the fan support and replace the fan.


Updated on 1 April 2026 by ScegliAuto


Related tutorials

Removing the Centre Console on a 2003 Volvo V40
Removing the Centre Console on a 2003 Volvo V40
Volvo V40 (1995-2012 / MK 1) In today's video, we will see the step-by-step process to remove the centre console from the dashboard of a 2003 Volvo V40, first generation. First, …
How to Reset the Tyre Pressure on a Volvo V40
How to Reset the Tyre Pressure on a Volvo V40
Volvo V40 (2012-2019 / MK 2) This brief video guide shows how to reset the tyre pressure on your Volvo V40, second series model produced from 2012 onwards. Start the operation by…
Removing the Front Door Panel on a Volvo V40 MK2
Removing the Front Door Panel on a Volvo V40 MK2
Volvo V40 (2012-2019 / MK 2) Let's look at the main steps to remove the front door panel on a second-generation Volvo V40. First, open the rear door and obtain a thin plastic lev…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos