Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Engine Protection Cover Rubber Bushings on Volvo XC 90

Model: Volvo Xc90 MK 1 - Years 2002-2014

In this video tutorial, learn how to remove and replace the rubber bushings of the engine protection cover on a first-generation Volvo XC 90 in simple steps. First, open and lift the hood. Next, disconnect and remove the engine protection cover to access the support bushings located in the cover. Now, remove them using a thin tool (or by hand if possible); then, insert the new bushings into their designated spaces and reinstall the cover over the engine, as shown in the video!

Updated on 30 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Turn Signal Bulb in the Front Headlight of the Volvo XC90
How to Replace the Turn Signal Bulb in the Front Headlight of the Volvo XC90
Volvo Xc90 (2002-2014 / MK 1) Today's instructions will allow you to disassemble and replace the turn signal bulb in the front headlight of the Volvo XC90. First, open the hood of…
Replacement of the timing belt of the Volvo XC90
Replacement of the timing belt of the Volvo XC90
Volvo Xc90 (2015-2026 / MK 2) Today's instructions will allow us to disassemble and replace the timing belt of the Volvo XC90. First, we open the hood of the vehicle and start by …
Replacement of the front turn signal bulb on the Volvo XC90
Replacement of the front turn signal bulb on the Volvo XC90
Volvo Xc90 (2002-2014 / MK 1) The step-by-step instructions in this guide will show us how to disassemble and replace the turn signal bulb of the front headlight of the Volvo XC90…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos