Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Service Light on the Volvo XC60

Model: Volvo Xc60 MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Service warning light

See other generations:
Video tutorial

In this video, you can see the procedure to follow independently, without the intervention of a technician, to reset the service light on the Volvo XC60. First, insert the electronic key into the ignition and briefly press the start button, causing the service light to appear in the center of the tachometer.

Next, press the T1 button located at the bottom of the tachometer and, for one second, press the start button, waiting for the letter I to appear in the center of the instrument cluster.

The letter will flash for a few seconds and then turn off, allowing you to release the T button. Operation completed.


Updated on 3 May 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Volvo XC60?
How to Reset the Service Light on a Volvo XC60?
Volvo Xc60 (2008-2016 / MK 1) To reset the Service light on a Volvo XC60, turn on the ignition and then connect a diagnostic tool to the vehicle's OBD port. This port is located o…
Resetting the Service Light on the Volvo XC60
Resetting the Service Light on the Volvo XC60
Volvo Xc60 (2008-2016 / MK 1) Follow the procedure to reset the service light for the regular maintenance of the engine oil change on the Volvo XC60. First, get in the vehicle and…
Resetting the Oil Change Service Light on the Volvo XC60
Resetting the Oil Change Service Light on the Volvo XC60
Volvo Xc60 (2008-2016 / MK 1) This guide will allow you to reset the service light for the routine maintenance oil change on the Volvo XC60. First, get inside the vehicle and pres…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos