Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Door Panel of the Volvo V90

Model: Volvo V90 MK 1 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Door trim panel

Video tutorial

Discover in this brief and simple guide how to remove and replace the rear door panel of the Volvo V90. First, open the rear door of your vehicle and start by removing the upper plastic cover, prying it off from the sides; then, unscrew all the fastening screws found on the door panel until you detach and remove it. At this point, disconnect the electrical connector of the window switch and the handle cable; all that's left is to reassemble everything by applying the reverse procedure!


Updated on 24 May 2026 by ScegliAuto


Related tutorials

How to Remove the Front Door Panel of a Volvo V90
How to Remove the Front Door Panel of a Volvo V90
Volvo V90 (2016-2024 / MK 1) To remove the inner trim from the front door of a Volvo V90, start with the trim at the top that has a chrome accent. Pry it off using a plastic tool…
How to Replace the Battery in the Volvo V90?
How to Replace the Battery in the Volvo V90?
Volvo V90 (2016-2024 / MK 1) You can replace the battery in the Volvo V90 by opening the rear compartment to access the components inside the engine bay: here you will find the c…
How to Reset the Service Light on the Volvo V90?
How to Reset the Service Light on the Volvo V90?
Volvo V90 (2016-2024 / MK 1) You can clear the Service light on the Volvo V90 by pressing and holding the button located at the bottom of the left steering wheel spoke. While hol…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos