Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light in the Volvo XC60?

Model: Volvo Xc60 MK 2 - Years 2017-2026
Part: Warning light – error code

Resetting the service light in the Volvo XC60 is straightforward. This operation should only be performed after completing the required scheduled maintenance. Start by turning the key to position 1, then turn on the instrument cluster, and press and hold the down arrow button located on the left side of the steering wheel. At the same time, press the brake pedal and start the engine. Continue holding the button for about 10 seconds, or until the display confirms the reset.

Updated on 8 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the "Service" Light on a Volvo XC60?
How to Reset the "Service" Light on a Volvo XC60?
Volvo Xc60 (2008-2016 / MK 1) Hello, today's guide aims to reset the "Service" light on your Volvo XC60. Before starting, ensure you have performed the recommended maintenance. Be…
How to Reset the Service Light on a Volvo XC60?
How to Reset the Service Light on a Volvo XC60?
Volvo Xc60 (2017-2026 / MK 2) Reset the Service light on a Volvo XC60 by connecting a diagnostic tool to the vehicle's OBD port, located just below the steering column. Once the s…
How to Reset the Service Light on a Volvo XC60?
How to Reset the Service Light on a Volvo XC60?
Volvo Xc60 (2008-2016 / MK 1) To reset the Service light on a Volvo XC60, turn on the ignition and then connect a diagnostic tool to the vehicle's OBD port. This port is located o…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos