Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light in the Volvo XC60

Model: Volvo Xc60 MK 1 - Years 2008-2016
Part: Service warning light

In today's video, you will learn how to reset the service light in the Volvo XC60. First, remember to perform this operation only after completing the routine maintenance on your vehicle, according to the manufacturer's recommendations in the owner's manual. Once done, we can proceed. Press the ignition button once to turn on the instrument cluster. Move the left lever until you find the corresponding parameter. At this point, start the vehicle and hold the selection button. After a few seconds, the reset will be complete, and you will be finished.

Updated on 21 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Volvo XC60?
How to Reset the Service Light on a Volvo XC60?
Volvo Xc60 (2008-2016 / MK 1) To reset the Service light on a Volvo XC60, turn on the ignition and then connect a diagnostic tool to the vehicle's OBD port. This port is located o…
How to Reset the Service Light on the Volvo XC60?
How to Reset the Service Light on the Volvo XC60?
Volvo Xc60 (2008-2016 / MK 1) To reset the Service light on the Volvo XC60, insert the key into the ignition switch and turn it to position 1, which only powers the instrument clu…
Resetting the Service Light on the Volvo XC60
Resetting the Service Light on the Volvo XC60
Volvo Xc60 (2008-2016 / MK 1) Follow the procedure to reset the service light for the regular maintenance of the engine oil change on the Volvo XC60. First, get in the vehicle and…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos