Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Fob Battery for Volvo S60

Model: Volvo S60 MK 2 - Years 2010-2018
Part: Key

In this brief tutorial, see how to replace the battery (CR2430 3V) of the key fob for a second-generation Volvo S60. First, remove the physical key from the fob by pulling the designated release tab to extract it. Next, insert a small flathead screwdriver into the slot where the key was housed and carefully pry off the back cover of the fob. Once removed, take out the two old batteries and insert a new pair, placing the first with the positive terminal facing up and the second with the positive terminal facing down. Finally, close the fob to complete the job.

Updated on 21 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Remote Key Battery for Volvo S60
Replacing the Remote Key Battery for Volvo S60
Volvo S60 (2010-2018 / MK 2) In this video, you will see how to disassemble and replace the battery of the remote key for a Volvo S60. First, take your remote key and remove the …
How to Replace the Key Fob Battery of the Volvo S60?
How to Replace the Key Fob Battery of the Volvo S60?
Volvo S60 (2010-2018 / MK 2) Replacing the key fob battery of the Volvo S60 is a very simple and inexpensive operation. For this, you will need a small flathead screwdriver and t…
How to change the battery of a Volvo S60 remote control
How to change the battery of a Volvo S60 remote control
Volvo S60 (2010-2018 / MK 2) Today we will see how to replace the batteries of the remote control of a Volvo S60, model produced from 2010 to 2018. Let's start the procedure by i…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos