Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Windshield Wiper Blade Replacement

Model: Volvo Xc90 MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Windshield wipers

See other generations:
Video tutorial

Replacing windshield wiper blades is a typical DIY maintenance task. With the arrival of winter, it's always a good idea to check their condition and possibly replace them with new ones.

The process is very simple: lift the wiper arms, rotate them 90 degrees, and disengage the locking tab to remove the blades. Then, align the new blade's mounting clip with the corresponding slot on the wiper arm and press it until it clicks into place.

Always check the correct length of the blades and any differences between the two, and choose a quality product.


Updated on 15 February 2026 by ScegliAuto


Related tutorials

Replacing the Window Switches and Turn Signal Levers on the Volvo V70, S60, S80, XC90
Replacing the Window Switches and Turn Signal Levers on the Volvo V70, S60, S80, XC90
Volvo Xc90 (2002-2014 / MK 1) In this video, see how to remove and replace the turn signal lever, as well as the wiper lever, on the Volvo XC90, as well as on the V70, S60, and S8…
Where are the fuses located in the Volvo XC90?
Where are the fuses located in the Volvo XC90?
Volvo Xc90 (2002-2014 / MK 1) All fuse boxes in the Volvo XC90 contain the fuses that regulate the operation of the devices present in the vehicle: this type of vehicle has four. …
Replacing the Rear Windshield Wiper Blade
Replacing the Rear Windshield Wiper Blade
Volvo Xc90 (2002-2014 / MK 1) Replacing the rear windshield wiper blade is very simple: before proceeding with the replacement, ensure that the new blade is fully compatible in bo…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos