Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Volvo V40 D2

Model: Volvo V40 MK 2 - Years 2012-2019
Part: Warning light – error code

This video tutorial shows the procedure to reset the maintenance light on the Volvo V40 D2. This is useful if a service has been performed but the light remains on. The procedure is simple and quick, taking about a minute to complete. To carry out this procedure, turn on the ignition of your Volvo, scroll through the menu to the service status option, then press and hold the selection button and the ignition button (the start & stop button) simultaneously for thirty seconds. When an orange 'i' starts flashing, release both buttons. Once this is done, the reset has been successfully completed.

Updated on 5 July 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Reset the Tyre Warning Light on the Volvo V40?
How to Reset the Tyre Warning Light on the Volvo V40?
Volvo V40 (2012-2019 / MK 2) In this tutorial, you will learn how to reset the tyre warning light on the Volvo V40, a very simple and quick operation to perform only after restor…
In the 2012 Volvo V40, How to Reset the Service Light?
In the 2012 Volvo V40, How to Reset the Service Light?
Volvo V40 (2012-2019 / MK 2) Watch the short video above to get an idea of how, just like any other car, the engine oil change is performed on the 2012 Volvo V40. Any other inter…
Resetting the tire pressure warning light on the Volvo V40
Resetting the tire pressure warning light on the Volvo V40
Volvo V40 (2012-2019 / MK 2) The procedure outlined in this guide will show us how to reset the tire pressure warning light on the Volvo V40; before performing the reset, it is n…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos