Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Side Turn Signal Bulb on a Volvo S60

Model: Volvo S60 MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Side marker bulb

See other generations:
Video tutorial

If one or both of the side turn signals on your Volvo S60 are not functioning properly and you want to replace them, just follow this procedure. First, park the car on a flat surface and turn it off completely.

Then, go to the turn signal light and, using a thin object, remove it. At this point, also take out the side turn signal bulb and proceed with the actual replacement. Finally, reassemble the light by applying a gentle push towards the body.


Updated on 25 July 2026 by ScegliAuto


Related tutorials

How to disassemble and replace the dome light in the Volvo S60
How to disassemble and replace the dome light in the Volvo S60
Volvo S60 (2000-2009 / MK 1) The instructions in this guide will allow you to disassemble and replace the dome light in the Volvo S60. First, get inside the vehicle and start by …
Removing the Front Headlight of the Volvo S60
Removing the Front Headlight of the Volvo S60
Volvo S60 (2010-2018 / MK 2) This guide shows you how to remove and replace the front headlight of the Volvo S60, including replacing the low beam bulb. First, open the hood of y…
How to Replace the Turn Signal Lever on the Volvo S60 MK1
How to Replace the Turn Signal Lever on the Volvo S60 MK1
Volvo S60 (2000-2009 / MK 1) Today, we will see step-by-step instructions to remove and replace the turn signal lever, which also applies to the wiper lever, on the Volvo S60, as…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos