Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. S60
    4. : Removing the headlight of the Volvo S60

Volvo S60 - Video tutorial

Model: Volvo S60 MK 2 - Years 2010-2018
Part: Headlight
Operation: Removing the headlight of the Volvo S60

Let's see in this guide how to remove and replace the headlight of the Volvo S60, later also replacing the low beam bulb. First of all, we open the bonnet of our car and begin to remove the small plastic rod, thus releasing the headlight from the body; we disconnect the electrical connector of the bulbs to remove it, as shown in the video. At this point we remove the plastic cap to access the headlight lights, replacing them with the new ones; then we reassemble everything, applying the reverse procedure for reassembly!


Posted on 7 May 2024 by ScegliAuto



How do you replace the front headlight glass of the Volvo S60?
Volvo S60 (2000-2009 / MK 1) In order to replace the front headlight glass of the Volvo S60, you need to completely remove the headlight from its housing by loosening the fixing
How do I replace the headlight on the Volvo S60?
Volvo S60 (2000-2009 / MK 1) To be able to replace the headlight on the Volvo S60 you have to lift the hood and remove the rivets located in the upper part of the headlight. Once
Volvo S60 timing belt replacement
Volvo S60 (2010-2018 / MK 2) In this video tutorial we will see how to replace the Volvo S60 timing belt, following the instructions below. First of all, we open the bonnet of ou

    Frequently Asked Questions

    • S60 2010-2018 - How much does it cost to replace the headlights on a Volvo S60? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos