Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Connect and Disconnect the Front Headlight Connector

Model: Volvo S60 MK 1 - Years 2000-2009
Part: Headlight

This video illustrates the procedure for connecting and disconnecting the front headlight connector on the passenger side of a Volvo S60. The video shows the connector already disconnected; the connector is yellow and must be attached to the receiving part (which is green). To successfully connect it, position the connector perfectly in line with the green part; you may need to attempt the connection several times. If you want to disconnect it, you can use a small flathead screwdriver: insert the tip into the slot at the back of the connector and gently pry it. The connector will pull out.

Updated on 4 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Front Headlight of the Volvo S60
Removing the Front Headlight of the Volvo S60
Volvo S60 (2010-2018 / MK 2) This guide shows you how to remove and replace the front headlight of the Volvo S60, including replacing the low beam bulb. First, open the hood of y…
Polishing Dull Headlights
Polishing Dull Headlights
Volvo S60 (2000-2009 / MK 1) If the headlights have become particularly yellowed and cloudy, you can restore them with a dedicated polishing kit. Open the hood and apply masking …
How to Replace the Front Headlight on a Volvo S60?
How to Replace the Front Headlight on a Volvo S60?
Volvo S60 (2000-2009 / MK 1) To replace the front headlight on a Volvo S60, lift the hood and remove the rivets located at the top of the headlight. Once these are removed, unscr…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos