Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. S60
    4. : Matt headlight polishing

Volvo S60 - Video tutorial

Model: Volvo S60 MK 1 - Years 2000-2009
Part: Headlight
Operation: Matt headlight polishing

If the headlights are particularly yellowed and opaque, they can be regenerated with the special polishing kit. So open the front hood and apply some paper tape all around the headlight to avoid dirtying the bumper and mudguard. Therefore, sand the lighthouse with an orbital sander and the sandpaper supplied until the lighthouse is completely opaque: several passes with papers of different granulometry may be necessary. Then polish the headlight with the special pastes and pads, always supplied with the kit, until an adequate shine is obtained.


Posted on 1 July 2023 by ScegliAuto



How do you replace the front headlight glass of the Volvo S60?
Volvo S60 (2000-2009 / MK 1) In order to replace the front headlight glass of the Volvo S60, you need to completely remove the headlight from its housing by loosening the fixing
Removing the headlight of the Volvo S60
Volvo S60 (2010-2018 / MK 2) Let's see in this guide how to remove and replace the headlight of the Volvo S60, later also replacing the low beam bulb. First of all, we open the b
How do I replace the headlight on the Volvo S60?
Volvo S60 (2000-2009 / MK 1) To be able to replace the headlight on the Volvo S60 you have to lift the hood and remove the rivets located in the upper part of the headlight. Once

    Frequently Asked Questions

    • S60 2010-2018 - How much does it cost to replace the headlights on a Volvo S60? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos