Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front headlight of the Volvo S60

Model: Volvo S60 MK 2 - Years 2010-2018
Part: Headlight

Let's discover the information that will show us how to disassemble and replace the front headlight and its bulbs of the Volvo S60. First, we open the hood of the car and start unclipping the plastic clips of the headlight to detach it and remove it from the body, then disconnecting the electrical connector found on the back, as shown in the video. At this point, we replace the bulbs if necessary, replacing either the entire headlight; then we reassemble the front headlight and make the connection, adjusting the height of the light beam through the headlight adjustment.

Posted on 6 January 2025 by ScegliAuto

Video tutorial

Related tutorials

Removing the Front Headlight of the Volvo S60
Removing the Front Headlight of the Volvo S60
Volvo S60 (2010-2018 / MK 2) This guide shows you how to remove and replace the front headlight of the Volvo S60, including replacing the low beam bulb. First, open the hood of y…
How to Replace the Front Headlight on a Volvo S60?
How to Replace the Front Headlight on a Volvo S60?
Volvo S60 (2000-2009 / MK 1) To replace the front headlight on a Volvo S60, lift the hood and remove the rivets located at the top of the headlight. Once these are removed, unscr…
How to Replace the Front Headlight Lens on a Volvo S60
How to Replace the Front Headlight Lens on a Volvo S60
Volvo S60 (2000-2009 / MK 1) To replace the front headlight lens on a Volvo S60, remove the headlight assembly from its housing by loosening the mounting screws and disconnecting…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos