Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight on a Volvo S60?

Model: Volvo S60 MK 1 - Years 2000-2009
Part: Headlight

To replace the front headlight on a Volvo S60, lift the hood and remove the rivets located at the top of the headlight. Once these are removed, unscrew the screws found inside the wheel well and those located under the front trim of the bumper. This will allow you to disconnect the connectors and remove the bumper. With the bumper removed, you can also loosen the screws at the bottom of the headlight: this will allow you to disconnect the connector at the back, remove it, and replace it with a new part.

Updated on 20 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Lens on a Volvo S60
How to Replace the Front Headlight Lens on a Volvo S60
Volvo S60 (2000-2009 / MK 1) To replace the front headlight lens on a Volvo S60, remove the headlight assembly from its housing by loosening the mounting screws and disconnecting…
Removing the Front Headlight of the Volvo S60
Removing the Front Headlight of the Volvo S60
Volvo S60 (2010-2018 / MK 2) This guide shows you how to remove and replace the front headlight of the Volvo S60, including replacing the low beam bulb. First, open the hood of y…
How to replace the front headlight of the Volvo S60
How to replace the front headlight of the Volvo S60
Volvo S60 (2010-2018 / MK 2) Let's discover the information that will show us how to disassemble and replace the front headlight and its bulbs of the Volvo S60. First, we open th…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos