Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Windshield Washer Reservoir from a Volvo S60?

Model: Volvo S60 MK 1 - Years 2000-2009
Part: Windshield wipers

To remove the windshield washer reservoir from a Volvo S60, first, loosen all the bolts securing the front bumper and remove it. This will allow you to also loosen the screws holding the right headlight and remove it from its housing by disconnecting its connectors. Now, you can unscrew the screws that secure the washer fluid tank to its housing and disconnect its connectors. The reservoir can then be removed and replaced with a new part. After replacement, reinstall all the parts removed earlier.

Updated on 17 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the gear knob of the Volvo S60
How to remove the gear knob of the Volvo S60
Volvo S60 (2010-2018 / MK 2) If you are planning to remove the gear knob of your second-generation Volvo S60 by yourself, but you don't know how to do it, then all you have to do…
Guide to Replacing the Timing Belt on the Volvo S60
Guide to Replacing the Timing Belt on the Volvo S60
Volvo S60 (2010-2018 / MK 2) Today's guide will show you the procedure to remove and replace the timing belt on the Volvo S60. First, open the hood of the vehicle and start by re…
Replacing the Timing Belt on the Volvo S60
Replacing the Timing Belt on the Volvo S60
Volvo S60 (2010-2018 / MK 2) In this video tutorial, learn how to replace the timing belt on the Volvo S60 by following the instructions below. First, open the hood of your car a…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos