Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Bumper on a Volvo S60

Model: Volvo S60 MK 1 - Years 2000-2009
Part: Front bumper

Let's remove the front bumper from a Volvo S60. Lift the hood of the Volvo, and using a plastic or metal lever, remove the clips on the sides of the front bumper. Unscrew the mounting screws located at the top of the bumper (in the holes on the bumper). Once the rivets at the top are removed, unscrew the screws in the splash guards and remove the pins at the bottom of the bumper. Pull the bumper away from the vehicle body by hand. To proceed with installation, align the bumper with the vehicle body by hand and tighten all the mounting screws.

Updated on 31 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight on a Volvo S60?
How to Replace the Front Headlight on a Volvo S60?
Volvo S60 (2000-2009 / MK 1) To replace the front headlight on a Volvo S60, lift the hood and remove the rivets located at the top of the headlight. Once these are removed, unscr…
Removing the Front Headlight of the Volvo S60
Removing the Front Headlight of the Volvo S60
Volvo S60 (2010-2018 / MK 2) This guide shows you how to remove and replace the front headlight of the Volvo S60, including replacing the low beam bulb. First, open the hood of y…
Replacement of the front headlights and lights of the Volvo S60
Replacement of the front headlights and lights of the Volvo S60
Volvo S60 (2010-2018 / MK 2) These short and simple steps will illustrate the process of disassembling and replacing the front headlight and bulbs of the Volvo S60. First, we ope…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos