Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Courtesy Light Bulb

Model: Volvo S60 MK 1 - Years 2000-2009
Part: Light bulb

Remove the cover of the dome light to access the socket. Disconnect the dome light by removing the connector. Open the lower compartment of the dome light by pushing it outward. You can now access the bulb. Choose a new replacement bulb identical to the one being replaced. Remove the faulty bulb and install the new bulb. Reassemble the dome light by reconnecting the power cable. Test for proper operation. You can perform the same procedure on the other interior dome lights, taking care to remove the covers without breaking them.

Updated on 6 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Tail Light of a Volvo S60
Replacing the Tail Light of a Volvo S60
Volvo S60 (2000-2009 / MK 1) Replace the burnt-out bulbs in the rear light on a Volvo S60. Open the trunk of the Volvo and remove the fabric side panel; you will find the bulb ho…
How to Replace Headlight and Brake Light Bulbs
How to Replace Headlight and Brake Light Bulbs
Volvo S60 (2000-2009 / MK 1) This video illustrates the procedures for replacing the front light bulbs and brake light bulbs. These procedures will be used for Volvo S60, Toyota …
Replacing Instrument Cluster Lights on Volvo S60
Replacing Instrument Cluster Lights on Volvo S60
Volvo S60 (2000-2009 / MK 1) To start, remove the trim around the instrument cluster using a plastic pry tool. This will give you access to the T25 Torx screws that secure the cl…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos