How to Replace Headlight and Brake Light Bulbs

This video illustrates the procedures for replacing the front light bulbs and brake light bulbs. These procedures will be used for Volvo S60, Toyota Camry, and Ford Explorer vehicles. Let's start with the Volvo S60. After obtaining the correct bulbs and gloves to avoid getting them dirty during installation, open the hood. After removing the metal clip and the bulb cover, pull out the old bulb and screw in the new one. Now reattach the clip and bulb cover. To replace the brake light bulb, open the trunk and, by turning the appropriate knob, move the side panel located inside. After removing the bulb holder, replace the old bulb with a new one. Reassemble everything as it was before. Now let's move on to the Toyota Camry. Again, obtain the correct bulbs. Open the front hood and remove the bulb holder, disconnect it from the electrical connection, and replace it with a new one; insert it back into its place. For the rear light, you will need to remove the panel located at the height of the brake lights; use a star-tip screwdriver for this. After removing the panel, unscrew the bulb holder and replace the bulb (always using gloves). For the Ford Explorer, you will need a screwdriver to remove the front headlight; pull out the bulb holder, unscrew the bulb(s), and replace them. Reposition the headlight as it was before. For the brake light bulb, unscrew the two screws that secure the rear light assembly, and after pulling it out, replace the faulty bulbs and reposition the light in its original place.