Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Volvo
  4. :
  5. Xc70
  6. : How to remove the manual gear knob of the Volvo XC70 Mk3.

Volvo Xc70 - Video tutorial

Model: Volvo Xc70 MK 3 - Years 2007-2016
Part: Gear Shift Knob
Operation: How to remove the manual gear knob of the Volvo XC70 Mk3.

The guide shows how to replace the knob of the manual gear lever of the Volvo XC70. From the bottom of the central console, remove the pen holder panel using a plastic lever. Next, act on the two plastic clips on the base of the gear panel and lift the leather cone finish to expose the knob locking ring. Using pliers, unscrew the knob block and remove only the lever terminal. Install the new element and lock it in place. Reassemble the gear cone retaining panel and pen holder panel. Check that the lever is functioning correctly.


Posted on 10 June 2023 by ScegliAuto



Replacement gear knob on Volvo Xc 70
Volvo Xc70 (2000-2007 / MK 2) Is the knob of the Volvo Xc 70 broken? Do we want to change it? Let's see how. With a plastic lever we detach the frame of the leather cap, we unhook
What is the fuse layout of the Volvo XC70?
Volvo Xc70 (2007-2016 / MK 3) If some of the devices in our Volvo XC70 have suddenly stopped working, we can first check the status of their respective fuses, the diagrams of whic
How do you remove the headrest from the Volvo XC70?
Volvo Xc70 (2007-2016 / MK 3) In order to remove the headrest of the Volvo XC70, you need to press the hidden buttons located at the back of the seatback, at the point shown in th

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos