Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. Xc70
    4. : Replacement gear knob on Volvo Xc 70

Volvo Xc70 - Video tutorial

Model: Volvo Xc70 MK 2 - Years 2000-2007
Part: Gear Shift Knob
Operation: Replacement gear knob on Volvo Xc 70

Is the knob of the Volvo Xc 70 broken? Do we want to change it? Let's see how. With a plastic lever we detach the frame of the leather cap, we unhook the circular plastic that connects the cap to the knob. We take the knob in our hands and rotate it to the left and right until it is removed from the shift rod (we cut the plastic clamp). Take the new knob and insert it into the rod on the central tunnel, tighten the same in the rod; we mount the new leather cap with the plastic washer. We block the plastic of the cap over the plastic of the central tunnel.


Posted on 10 December 2023 by ScegliAuto



How to remove the manual gear knob of the Volvo XC70 Mk3.
Volvo Xc70 (2007-2016 / MK 3) The guide shows how to replace the knob of the manual gear lever of the Volvo XC70. From the bottom of the central console, remove the pen holder pan
Replacement of the timing belt of the Volvo XC70
Volvo Xc70 (2007-2016 / MK 3) Today's guide will show us the main steps to disassemble and replace the timing belt of the Volvo XC70. First, we open the hood and start disassembli
Where is the fuel filter located in the Volvo XC70?
Volvo Xc70 (2007-2016 / MK 3) In this video, we can see where the fuel filter is located in the Volvo XC70 and how to proceed in case we need to replace it, which is an extremely

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos