Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the side ventilation nozzle of the Volvo XC70

Model: Volvo Xc70 MK 3 - Years 2007-2016
Part: Air vents

The instructions in this guide will show us how to disassemble and replace the side air vent nozzle of the Volvo XC70 dashboard. First, we get into the cabin and start removing the side plastic cover of the dashboard; then we remove the side plastic cover of the air diffuser, levering on the sides to detach and remove it, as shown in the video. At this point, we carry out the repair or replacement of the air vent nozzle, fixing it correctly on the dashboard; in the same way, we will also replace the other air vents!

Posted on 9 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery on a Volvo XC70?
How to Replace the Battery on a Volvo XC70?
Volvo Xc70 (2007-2016 / MK 3) To replace the battery on a Volvo XC70, open the bonnet to access the components in the engine bay. Here, locate the battery at the top right of the …
Replacement of the timing belt of the Volvo XC70
Replacement of the timing belt of the Volvo XC70
Volvo Xc70 (2007-2016 / MK 3) Today's guide will show us the main steps to disassemble and replace the timing belt of the Volvo XC70. First, we open the hood and start disassembli…
Replacing the Rear Light on the Volvo XC70
Replacing the Rear Light on the Volvo XC70
Volvo Xc70 (2000-2007 / MK 2) Today, we will go through the steps to remove and replace the rear light on the Volvo XC70. First, open the tailgate and start unscrewing the fixing …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos