Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. Xc70
    4. : Replacement of the timing belt of the Volvo XC70

Volvo Xc70 - Video tutorial

Model: Volvo Xc70 MK 3 - Years 2007-2016
Part: Timing belt
Operation: Replacement of the timing belt of the Volvo XC70

Today's guide will show us the main steps to disassemble and replace the timing belt of the Volvo XC70. First, we open the hood and start disassembling and removing the engine support by unscrewing the fixing screws; then we remove the distribution cover, as shown in the video. At this point, we lift the car and remove the right front wheel; then we rotate the crankshaft pulley until the notch on the pulley matches that of the crankcase. At this point, we proceed with the replacement of the timing belt, following the video tutorial until the end!


Posted on 12 April 2024 by ScegliAuto



How do I replace the resistor of the Volvo XC70 cabin fan?
Volvo Xc70 (2007-2016 / MK 3) In order to replace the Volvo XC70 fan resistor you need to remove the side cover of the central tunnel which is located in correspondence with the f
What is the fuse layout of the Volvo XC70?
Volvo Xc70 (2007-2016 / MK 3) If some of the devices in our Volvo XC70 have suddenly stopped working, we can first check the status of their respective fuses, the diagrams of whic
How do you remove the headrest from the Volvo XC70?
Volvo Xc70 (2007-2016 / MK 3) In order to remove the headrest of the Volvo XC70, you need to press the hidden buttons located at the back of the seatback, at the point shown in th

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos