Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to replacing the timing belt of the Volvo XC70 2.4L

Model: Volvo Xc70 MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Timing belt

See other generations:
Video tutorial

Today we will see the procedure that will allow us to disassemble and replace the timing belt of the Volvo XC70 2.4 Diesel. First, we open the hood of the car and remove the top cover; then we remove the engine support and the tray on its left, then lift the vehicle to proceed with the disassembly of the right front wheel and the crankshaft pulley (disconnecting the V-belt first), as shown in the video.

At this point, we remove the timing belt cover and proceed with the replacement of the belt, following the video tutorial until the end!


Posted on 1 February 2025 by ScegliAuto


Related tutorials

Replacing the Timing Belt on the Volvo XC70
Replacing the Timing Belt on the Volvo XC70
Volvo Xc70 (2007-2016 / MK 3) This guide will illustrate the main steps to dismantle and replace the timing belt on the Volvo XC70. First, open the bonnet and begin removing the e…
How to replace the coolant reservoir of the Volvo XC70.
How to replace the coolant reservoir of the Volvo XC70.
Volvo Xc70 (2000-2007 / MK 2) The instructions provided in this guide will allow us to disassemble and replace the engine coolant reservoir of the Volvo XC70. First, let's open th…
Replacing the Rear Light on the Volvo XC70
Replacing the Rear Light on the Volvo XC70
Volvo Xc70 (2000-2007 / MK 2) Today, we will go through the steps to remove and replace the rear light on the Volvo XC70. First, open the tailgate and start unscrewing the fixing …

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos