Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Climate Control Console in a Volvo XC60?

Model: Volvo Xc60 MK 1 - Years 2008-2016
Part: Air conditioner

In this tutorial, you will see how to remove the climate control console in a Volvo XC60, a very simple and quick operation. First, ensure the key is not in the ignition, then pry off the central display frame using a flathead screwdriver or, preferably, a plastic trim tool. Next, remove the CD player frame, unscrew the indicated screws, and continue by prying off the two side panels of the tunnel. Finally, disconnect the various connectors, separate the console from the dashboard, and follow the reverse procedure to install any replacement part.

Updated on 13 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Use the Air Conditioner in the Volvo XC60?
How to Use the Air Conditioner in the Volvo XC60?
Volvo Xc60 (2008-2016 / MK 1) To use the air conditioner in the Volvo XC60, insert the ignition key and start the engine to prevent the air conditioner from draining the battery c…
How do you reset the air conditioner of the Volvo XC60?
How do you reset the air conditioner of the Volvo XC60?
Volvo Xc60 (2008-2016 / MK 1) To reset the air conditioning system of the Volvo XC60, you need to turn on the dashboard by inserting the ignition key: once the dashboard is on, yo…
How to Remove the Door Panel of the Volvo XC60?
How to Remove the Door Panel of the Volvo XC60?
Volvo Xc60 (2017-2026 / MK 2) To replace the door panel of the Volvo XC60, loosen the bolts located at the bottom of the armrest, above the door pocket. Once these screws are loos…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos