Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly and Battery Replacement for Key Remote

Model: Volvo V70 MK 1 - Years: 1996, 1997, 1998, 1999, 2000
Part: Key

See other generations:
Video tutorial

Take the appropriate screwdriver and unscrew the screw located at the bottom rear. Carefully open the remote into two parts: one contains the battery housing and the other holds the circuit board.

To remove the board, simply press the buttons and it will come out of its housing. Now you can remove the plastic buttons from their position.

At the back of the remote, you will find the battery housing. To extract it, use a small screwdriver to lever the battery out. This operation was performed on a key remote for a Volvo V70.


Updated on 19 February 2026 by ScegliAuto


Related tutorials

Removing the Car Radio from a Volvo V70
Removing the Car Radio from a Volvo V70
Volvo V70 (1996-2000 / MK 1) In this video, learn how to remove the original car radio from a first-generation Volvo V70 by following these simple steps. First, disconnect the ne…
Removing the Instrument Cluster from the Volvo V70 Dashboard
Removing the Instrument Cluster from the Volvo V70 Dashboard
Volvo V70 (2000-2007 / MK 2) Today, you will discover the instructions that will allow you to remove and replace the instrument cluster from the dashboard of the Volvo V70 in sim…
Removing Fuel Pump from Volvo V70
Removing Fuel Pump from Volvo V70
Volvo V70 (2000-2007 / MK 2) Let's remove the fuel pump located in the tank of the Volvo V70. To access the fuel pump, remove the rear seat cushions: take out the rear seats of t…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos