Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. V40
    4. : How to replace the rear windshield wiper of a Volvo V40.

Volvo V40 - Video tutorial

Model: Volvo V40 MK 2 - Years 2012-2019
Part: Windscreen wipers
Operation: How to replace the rear windshield wiper of a Volvo V40.

To change the rear windshield wiper of our Volvo V40, we first need to get the replacement part. We can find it, for example, on Amazon, with the code B079S2MQMQ. The cost is 6.18 euros with free delivery. Once we have obtained the replacement part, we can proceed with the replacement. Using a small screwdriver, we lever the wiper arm and remove the blade, being careful not to damage the arm. We keep the arm lifted off the glass to avoid scratching it, and we take the new blade, which we will fit into its housing by pushing it upward. Job done.


Posted on 3 September 2023 by ScegliAuto



How to replace the wiper blades on Volvo V40
Volvo V40 (2012-2019 / MK 2) Let's see how to change the front wiper blades of a Volvo V40. Take the front brush (with your hands), pull the movable brush (gently without breakin
How do you replace the timing belt of the Volvo V40?
Volvo V40 (2012-2019 / MK 2) To replace the timing belt on the Volvo V40, it is necessary to open the hood in order to access the components located inside the engine compartment
How do you replace the timing belt on a Volvo V40?
Volvo V40 (2012-2019 / MK 2) The timing belt of the Volvo V40 can be replaced by opening the hood, so that access can be gained to the components located inside the engine compar

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos