Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. V70
    4. : How do you reset the Service indicator of the Volvo V70?

Volvo V70 - Video tutorial

Model: Volvo V70 MK 2 - Years 2000-2007
Part: Checks and maintenance
Operation: How do you reset the Service indicator of the Volvo V70?

To reset the Service light on the Volvo V70, you need to press and hold the button located on the left side of the instrument panel while it is turned off. While still holding the button, insert the key into the ignition and turn it to start the instrument panel. Once it is turned on, continue holding the button until the light is reset. After completing the procedure, you can release the button and turn off the instrument panel.


Posted on 10 October 2023 by ScegliAuto



How to reset the "Service" light on a Volvo V70?
Volvo V70 (2000-2007 / MK 2) Good morning! Today we will focus on resetting the "Service" light on our Volvo V70. Before we begin, it is essential to have performed the recommend
How to reset the Volvo V70 service light
Volvo V70 (2000-2007 / MK 2) In this new mini guide dedicated to the Volvo V70 Mk2 we will discover together how to manually reset the service warning light. The latter is a simp
How to reset the Volvo V70 service light 1
Volvo V70 (1996-2000 / MK 1) In this our new mini guide dedicated to your Volvo V70 Mk1 we will find out together how to reset the service light correctly and above all in total

    Frequently Asked Questions

    • V70 2000-2007 - How to reset the Volvo V70 service warning light? Read Answer
    • V70 2007-2016 - Where is the amplifier of the Volvo V70 located? Read Answer
    • V70 2000-2007 - What problems does the Volvo V70 have when switching on? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos