Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Volvo V40?

Model: Volvo V40 MK 1 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Service warning light

See other generations:
Video tutorial

To reset the Service light on a Volvo V40, turn on the car's instrument panel by rotating the ignition key in the ignition switch: once the panel is on, press and hold the button located at the bottom left of the speedometer. After a few seconds, you will notice the Service light start to flash: when you hear a beep, you can release the button, noting that the light has disappeared from the instrument panel.

You can turn off the panel by rotating the key at the end of the operation.


Updated on 5 September 2026 by ScegliAuto


Related tutorials

How to reset the Service light on the Volvo V40?
How to reset the Service light on the Volvo V40?
Volvo V40 (2012-2019 / MK 2) To reset the Service light on the Volvo V40, turn the ignition on by rotating the key. Then, press and hold the OK button located at the end of the l…
How do you reset the Service light of the Volvo V40?
How do you reset the Service light of the Volvo V40?
Volvo V40 (2012-2019 / MK 2) You can completely remove the Service light from the instrument panel of the Volvo V40 by first turning on the instrument panel, turning the key, and…
How to Reset the Service Light on a Volvo V40?
How to Reset the Service Light on a Volvo V40?
Volvo V40 (2012-2019 / MK 2) On the Volvo V40, resetting the Service light is done by turning on the instrument panel by turning the key and then holding down the OK button locat…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos