Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Exterior Handle of the Volvo XC40?

Model: Volvo Xc40 MK 1 - Years 2017-2026
Part: Handle

To remove the exterior handle of the Volvo XC40, open the rear door of the vehicle to locate the hole on its side. Inside this hole, you will find the screw that secures the handle to its housing. By completely loosening and removing the screw from its position, you can fully take off the handle from its housing, allowing you to install the new one. The new handle can then be secured with the side screw to ensure everything functions correctly.

Updated on 13 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you remove the door handle of a Volvo XC40?
How do you remove the door handle of a Volvo XC40?
Volvo Xc40 (2017-2026 / MK 1) In this video we see how to remove the handle of a Volvo XC40: the youtuber also removed the internal door panel, but it is not necessary to remove t…
How to disassemble the external rearview mirror of the Volvo XC40
How to disassemble the external rearview mirror of the Volvo XC40
Volvo Xc40 (2017-2026 / MK 1) Let's discover the information that will allow us to disassemble and replace the external rearview mirror of the Volvo XC40. First, we open the front…
Fuse schema and positioning of the Volvo XC40.
Fuse schema and positioning of the Volvo XC40.
Volvo Xc40 (2017-2026 / MK 1) Below we will see the instructions regarding the layout and positioning of the fuse boxes of the Volvo XC40. First, we open the front door on the dri…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos