Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. V60
    4. : How to reset the tire pressure sensor on the Volvo V60

Volvo V60 - Video tutorial

Model: Volvo V60 MK 1 - Years 2010-2018
Part: Checks and maintenance
Operation: How to reset the tire pressure sensor on the Volvo V60

Following this short and simple procedure, we will proceed to reset the tire pressure warning light of the Volvo V60; before performing the TPMS reset, it is necessary for all four tires to be at the correct pressure. So, get into the car and follow the instructions to recalibrate the TPMS system; if the pressures detected by the system are correct, the tire pressure warning light and alert will be automatically reset on the instrument panel, following the video tutorial until the end!


Posted on 17 February 2024 by ScegliAuto



To reset the TPMS light on the Volvo V60.
Volvo V60 (2018-2024 / MK 2) The manual reset of the TPMS light on your new Volvo V60 Mk2 is a very simple operation, and thanks to the following guide, you will be able to compl
How to reset the service in the Volvo V60?
Volvo V60 (2010-2018 / MK 1) In this tutorial we can see how to reset the service light in the Volvo V60, a very simple and quick operation, to be carried out obviously only afte
How to reset the service in the Volvo V60?
Volvo V60 (2010-2018 / MK 1) In this video we can see how to reset the service in the Volvo V60, a very simple and fast operation, to be carried out only after having carried out

    Frequently Asked Questions

    • V60 2018-2025 - When should I do the maintenance check-ups for the Volvo V60? Read Answer
    • V60 2018-2025 - How to reset the service light on the Volvo V60? Read Answer
    • V60 2018-2025 - How often should the Volvo V60 be serviced? Read Answer
    • V60 2018-2025 - How many km do you need to service the Volvo V60 d2? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos