Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the glass of the external rearview mirror of the Volvo V50

Model: Volvo V50 MK 1 - Years 2004-2012
Part: Side mirror

Today's main steps will show us how to disassemble and replace the glass of the external rearview mirror of the Volvo V50. First, let's move to the side and start prying the mirror glass to detach and remove it, disconnecting the small connector on the back; then we check the wear of the mirror supports, making sure they are in good condition. At this point, we install the mirror glass, connecting the small cable and finally adjusting the mirror glass!

Posted on 14 July 2024 by ScegliAuto

Video tutorial

Related tutorials

Removing the Mirror from a Volvo V50
Removing the Mirror from a Volvo V50
Volvo V50 (2004-2012 / MK 1) Here’s how to remove the external mirror from a Volvo V50. Using a plastic-coated lever, pry between the perimeter of the mirror frame and the glass.…
How to remove the driver's side wing mirror on a Volvo V50
How to remove the driver's side wing mirror on a Volvo V50
Volvo V50 (2004-2012 / MK 1) How to remove the external wing mirror of a Volvo V50? Let's look at disassembling the mirror parts. Pry between the perimeter of the mirror frame an…
How to Remove the Wing Mirror on Volvo V50
How to Remove the Wing Mirror on Volvo V50
Volvo V50 (2004-2012 / MK 1) How do you remove the external mirror from a Volvo V50? Let’s see how to detach the mirror fixed in the housing. Pry between the perimeter of the mir…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos