Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuse positioning and diagram for the Yamaha Xmax 300

Model: Yamaha Xmax 400
Part: Fuse box

Video tutorial

Below we will see the instructions that will allow us to access the fuse box of the Yamaha Xmax 400 scooter, also finding the diagram. First, we put the scooter on the center stand and start by removing the possible windshield and the front plastic fairing, unscrewing the fixing screws; next to the battery we will find the main fuses and relays of the electrical system, as shown in the video.

In the user manual we find the fuse diagram and chart, useful for replacements and to find all the fuse codes and amperages!


Posted on 5 April 2025 by ScegliAuto


Related tutorials

How to Reset the V-Belt Warning Light on a Yamaha Xmax 400?
How to Reset the V-Belt Warning Light on a Yamaha Xmax 400?
Xmax 400 To reset the V-Belt warning light on the Yamaha Xmax 400, insert the key into the ignition switch and turn it to power on the dashboard. To reset the…
Reset the belt change warning for the Yamaha Xmax 400.
Reset the belt change warning for the Yamaha Xmax 400.
Xmax 400 Following the instructions in this guide, we will see how to reset the warning for the replacement of the transmission belt of the Yamaha Xmax 400 sc…
How to Replace the Front Brake Pads on a Yamaha Xmax 400?
How to Replace the Front Brake Pads on a Yamaha Xmax 400?
Xmax 400 To replace the front brake pads on a Yamaha Xmax 400, you will need a 15 mm socket, a 10 mm T-bar, a 5 mm hex key, a screwdriver, a brush, thread loc…

How to Replace the Front Headlight Bulbs on a KTM Duke 125?

Replacing the front headlight bulb on the KTM Duke 125, as shown in this tutorial, is an extremely simple and quick task. First, ensure that the key is not inserted, then using a Torx screwdriver, remove both the bolts and the rivets securing the front fairing and separate it from the handlebars. Next, remove the large rubber cap located at the back of the headlight, disconnect the power connector, and unlock the metal clip. Once the bulb is extracted, insert the replacement without touching the glass directly with your bare hands, and finally reassemble everything.

Watch the video!


by ScegliAuto

More videos