Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
I will show you how to change the engine oil on your Yamaha Xmax. This is a task you can perform without too much trouble, even without the help of a specialist. First, take a container to collect the used oil and place it under the drain plug (located at the bottom of the casing). Unscrew the drain plug and collect all the oil in the container. Once you have collected the used oil, screw the drain plug back in. Now unscrew the filler cap and add the new oil. Finally, simply screw the filler cap back on.

Updated on 9 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change Engine Oil and Oil Filter on a Yamaha Xmax
How to Change Engine Oil and Oil Filter on a Yamaha Xmax
Xmax 400 Today, with the help of this short video, I will explain how to change the oil and filter on your Yamaha Xmax. First, take a container for collecting…
How to Change the Oil on a Yamaha Xmax 400 Scooter
How to Change the Oil on a Yamaha Xmax 400 Scooter
Xmax 400 How to change the oil on a Yamaha Xmax 400 scooter? Learn how to replace it. Position the scooter on the original stand, and with a socket wrench, un…
How to Reset the Oil Change Light on a Yamaha XMAX 400 Scooter?
How to Reset the Oil Change Light on a Yamaha XMAX 400 Scooter?
Xmax 400 In this tutorial, you will see how to reset the oil change light on a Yamaha XMAX 400 scooter, a very simple and quick operation, to be performed onl…

How to Turn Off the "V-Belt" Warning Light on a Yamaha X-MAX 400 Scooter?

In this tutorial, learn how to turn off the "V-Belt" warning light on the Yamaha X-MAX scooter's instrument panel, a very simple and quick operation. Before doing this, ensure you have completed the required maintenance, specifically replacing the drive belt. Start by inserting the key and turning on the ignition, then open the small right glove compartment and unscrew the screw for the upper cover. Once removed, locate the white connector with a jumper attached, disconnect it, wait about 10 seconds, and reconnect it. If successful, the warning light will disappear.

Watch the video!


by ScegliAuto

More videos