Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery of the Yamaha R1

Model: Yamaha R1 Yamaha
Part: Battery

Video tutorial

You can replace the battery installed on the Yamaha R1 by loosening the screws that secure the seat of the motorcycle to its housing, allowing access to the components underneath: the battery can then be released from the screws securing the device and the associated power cables.

At this point, remove the old battery from its location to insert the new one: the new battery must be secured with screws and connected to the power cables, then cover everything with the motorcycle seat.


Posted on 23 October 2026 by ScegliAuto


Related tutorials

How to Replace the Battery in a Yamaha R1?
How to Replace the Battery in a Yamaha R1?
R1 Yamaha To replace the battery in a Yamaha R1, loosen the screws located at the rear of the seat so that it can be completely removed. This will provide acce…
Replacing Battery on Yamaha R1
Replacing Battery on Yamaha R1
R1 Yamaha In this video tutorial, we will see how to remove and replace the battery on a Yamaha R1, following the instructions provided below. First, remove th…
How to Replace the Battery on the 2012 Yamaha R1
How to Replace the Battery on the 2012 Yamaha R1
R1 Yamaha In this video, you will see the steps to remove and replace the battery on the 2012 Yamaha R1. First, remove the rider's seat by unscrewing the fixin…

How to change the engine oil of a Honda Click 125i?

To change the engine oil of a Honda Click 125i, first ensure the bike is on a flat surface and that the engine has been warmed up for a few minutes, as warm oil drains better. Turn off the engine and place a container under the engine to collect the used oil. You will find the oil drain plug at the bottom of the engine; remove it with a spanner and allow the old oil to drain completely. Once all the oil has drained, clean the plug and the drain hole before refitting the plug, ensuring it is tight. Next, fill the engine with new oil, using a funnel to avoid spills. Gradually add oil until you reach the correct level, being careful not to overfill. After adding the oil, start the engine for a few minutes to allow the new oil to circulate. Turn off the engine and check for any leaks around the drain plug.

Watch the video!


by ScegliAuto

More videos