Do it yourself
Frequently asked questions about cars and motorcycles

Water Pump Replacement Yamaha T Max 500

Model: Yamaha Tmax 500
Part: Pump

Video tutorial

To replace the water pump, first remove all the covers and panels on the left side of the bodywork. Once you have access to the radiator area, there is a plug at the bottom that you need to unscrew to drain all the coolant, ensuring you place a container on the floor to collect the fluid.

Next, disconnect the coolant hoses going in and out of the pump and unscrew the mounting bolts of the pump itself. At this point, you can extract the pump assembly for replacement or refurbishment.

Finally, reassemble the water pipes, refill the cooling system, and reattach all the body components.


Updated on 14 May 2026 by ScegliAuto


Related tutorials

Tmax 500 This video outlines the steps to remove and replace the battery of the Yamaha T-Max 500 first series. First, locate the battery at the front of your …
Tmax 500 The service light on a motorcycle is even more important than on a car. This is because if a four-wheeled vehicle has problems and stops, it remains …
Tmax 500 Below are the instructions that will allow you to remove and replace the drive belt on the Yamaha Tmax 500 scooter. First, place it on the centre sta…

How to Set the Clock on the Kymco Agility?

To adjust the clock on the Kymco Agility, insert the key into the ignition to turn on the dashboard: once it is on, press and hold the button at the bottom left of the dashboard. You will notice that the hours will start to flash, which can be changed by repeatedly pressing the button to the right of the dashboard: once the hours are set, press the button on the left of the dashboard to adjust the minutes in the same way.

Watch the video!


by ScegliAuto

More videos