Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Yamaha
    3. :
  3. Xmax 250
    4. : Setting the clock on a Yamaha Xmax 250.

Model: Yamaha Xmax 250
Part: -board computer
Setting the clock on a Yamaha Xmax 250.

In this very short video guide today, we can see the detailed procedure for changing the time on a Yamaha Xmax 250, year 2012/2013. After turning on the injection and instrument panel, we press and hold down the "SELECT" and "RESET" buttons simultaneously for a few seconds, until the time on the display starts flashing. Once this is done, we can press the "RESET" button to change the number of hours and then the "SELECT" button to move on to the number of minutes. Finally, to complete the operation, we press the "SELECT" button again.


Posted on 14 April 2023 by ScegliAuto



How do you set the clock on the Yamaha Xmax 250?
Xmax 250 To set the clock on the Yamaha Xmax 250, you need to insert the ignition key into the ignition switch and turn it to start the instrument panel. Once
How to reset the service indicator on the Yamaha XMax 250
Xmax 250 The manual reset of the service light on the central panel of your Yamaha XMax 250 can be completed without any difficulty even if you are on your ow
How to adjust the time on the Yamaha XMAX 250 scooter?
Xmax 250 In this tutorial, we can see how to adjust the time on the Yamaha XMAX 250 scooter, an extremely simple and quick operation to be carried out, for ex

How to change the engine oil and relative filter of Suzuki Access 125

The guide shows how to replace the engine oil and relative filter on the Suzuki Access 125 scooter. The first operation to perform is to open the stand and secure the vehicle. At this point, having opened the oil filler cap, unscrew the 14 mm drain bolt from the bottom of the scooter; place a container for fluid disposal. Carry out a cleaning cycle from the old oil with diesel oil or with the specific additive. Install the new drain plug gasket and put it back in place. Unscrew the three 8 mm fixing bolts of the filter cover and remove the old cartridge and gasket. Install the new elements after cleaning the housing and tighten the cover in place. Top up the oil tank and run the engine for a few minutes; then realign the fluid to the correct level.

Watch the video!


by ScegliAuto

More videos